ASTM D3451 ASTM D3794 UV Aging Test Chamber
Introduction
Ultraviolet accelerated aging test box is our company’s ultraviolet accelerated aging test in luv-i
On the basis of the box of newly developed micro-machine products, the technical parameters fully comply with the national standard.
GB/T1865-2009;ISO11341:2004 artificial weathering and radiation exposure of paints and varnishes.
ISO4892 plastics – methods for exposure to laboratory light sources ASTM D3451 coatings powders and powder coatings Testing ?, ASTM D3794? testing of coil coatings ?.The instrument adopts LCD display
Intuitive, easy to operate, replacing the (old) luv-ii instrument cumbersome operation;High precision digital temperature is adopted
The temperature control precision is greatly improved by degree sensor and PID adjustment.It also added the ability to remember time,
The sudden power failure during the test process is avoided, which causes the test to start again.
ASTM D3451 ASTM D3794 UV Aging Test Chamber
Main technical parameters
- Total power: 1.25kw
- Power supply: AC220V/50Hz
- Timing range of test time: 1s~999h59min59s
- Spraying time timing range (double setting) : 1s~99h59min59s
- Test temperature setting range: 38±3℃
- Uv peak nominal wavelength (photon energy) : 313nm(91.5kcal/gmol)
- Power of ultraviolet fluorescent lamp: 0.02kw×3
- Rated life of lamp: 1600h
- The diameter of the axis distribution of the lamp tube to the turntable: 80mm
- The nearest distance from the lamp tube wall to the sample: 28 ~ 61mm
- bogie rotating sample diameter: ? 189 ~ ? 249 mm
- Power of the sample frame driving motor: 0.025kw
- Speed of transmission motor: 1250r.p.m
- Rotating speed of sample frame: 3.7cp.m
- Pump power: 0.08kw
- Water pump flow rate: 47L/min
- Heat pipe power: 1.0kw
- Sample specification: 75mm×150mm×(0.6)mm
- Overall dimension of test chamber (D×W×H) : 395 (385) ×895×550mm
- Weight: 63kg
21.New machine with baffle sink, temperature control switch, emergency stop switch
ASTM D3451 ASTM D3794 UV Aging Test Chamber
Product overview
This device is suitable for predicting paint, coating, plastic and other metals through light and water exposure accelerated aging test
The relative durability of materials, especially suitable for observing the physical property damage of especially durable materials, such as reduced luster,
Fogging, strength reduction, powdering, cracking, foaming, embrittlement and fading, etc.
As with other laboratory accelerated tests, the results of this device cannot be used as a substitute for natural exposure.
The actual durability of the material is determined, but the contrastive test conditions provided by this device can quickly evaluate the resistance to aging of the material.
It is relatively practical to optimize performance, screen or improve old and new formulas, and monitor product quality.
Ultraviolet light is the main factor that causes the durability of outdoor products to decline, coupled with fluorescent lamps
所有評論僅代表網(wǎng)友意見，與本站立場無關(guān)。