LR-B010 Three Box Thermal Shock Chamber
Use
Programable thermal shock chamber price is used to test the change of material under extremely high temperature and extremely low temperature environment that continue alternation in the shortest time,Testing the chemical changes or physical damage of material caused by the thermal expansion and contraction. Testing box divided two parts, one is hightemperature region, another is low-temperatureregion, the testing sample placed on the moving basket, using unique heat storage and cool storage,the cylinder taking basket moves up and down in the hot and cold region to complete the hot and cold temperature impact testing.
LR-B010 Three Box Thermal Shock Chamber
Specification
| Model | A (A~D) | B (A~D) | C (A~D) | D (A~D) | E (A~D) | F (A~D) |
| Inner size: WHD(cm) | 40*35*30 | 50*30*40 | 50*40*40 | 50*50*40 | 60*40*50 | 60*50*50 |
| External size: WHD(cm) | 150*180*150 | 160*175*160 | 160*185*160 | 160*185*170 | 170*185*170 | 170*195*170 |
| Temperature range(Test Chamber) | high temperature:+60℃~+200℃;low temperature -10℃~-65℃(A:-45℃;B:-55℃;C:-65℃) | |||||
| Heating Time | RT~200℃ About 30min | |||||
| Cooling Time | RT~-70℃ About 85min | |||||
| Temperature Conversion Time | Less than 10S | |||||
| Temperature Recovery Time | Less than 5min | |||||
| Temperature Deviation | ±2.0℃ | |||||
| Temperature Fluctuation | ±0.5℃ | |||||
| Material | External material: SUS#304 Stainless steel plate Internal material:SUS#304Stainless steel plate | |||||
| Output Mode | Water-cooled or air-cooled,Taikang compressor in France | |||||
| Controller | TEMI South Korea | |||||
| Cooling System | Water-cooled or air-cooled,Taikang compressor in France | |||||
| Protection devices | Fuse switch, compressor overload switch, refrigerant high and low pressure protection switch,super humidity over-temperature protection switch, fuse, failure warning system | |||||
| patrs | Watching window;50mm testing hole; partition plat | |||||
| Power | AC380V 50/60Hz Three-phase four-wire ac power | |||||
| weight (kg) | 750 | 790 | 830 | 880 | 950 | 1050 |
LR-B010 Three Box Thermal Shock Chamber
| 1. Profile. | |
| 1.1 Item | Thermal shock test chamber (three zone) |
| 1.2 Model | LR-B010 |
| 1.3 Sample restrictions
| The equipment is prohibited to do the test and storing as below: – Flammable, explosive, volastile substances; – Corrosive substances; – Biological samples; – Source of strong electromagnetic radiation. |
| 1.4 Test condition | Envrionmental temperature: +25℃; humidity: ≤85%, with no samples inside the chamber |
| 1.5 Test method | GB/T 5170.2-1996 temperature test chamber and so on |
| 1.6 Meet the test standard | Meet GB2423, IEC68-2-14, JIS C 0025, MIL-STD-883E, IPC 2.6.7, BELLCORE and other standards |
| 2. Technical parameters. | |
| Inner size (WxHxD)mm | 400×350×300mm |
| Inner volume | 42L |
| External size (WxHxD)mm | 1550x1650x 1470mm |
| Preheating temperature | +60℃～+200℃ (heat up +25℃～+200℃∕ 20min) |
| Precooling temperature | -10℃ ～-45℃ (cooling +25℃～-45 ℃∕65min) |
| High temp. shock range | +60℃～+150℃ |
| Low temp. shock range | -10℃～-40℃ |
| Temperature fluctuation | ±0.5℃ |
| Temperature deviation | ±2.0℃ |
| Shock recovery time | ≤5min (control point) |
所有評論僅代表網友意見，與本站立場無關。