本公司5月10號08點55分報道：TCJT-33型熱變形溫度維卡軟化點測定儀價格@市場報道
產品簡介
YI、TCJT-33型熱變形溫度維卡軟化點測定儀概述：
YI、TCJT-33型熱變形溫度維卡軟化點測定儀概述：
TCJT-33型熱變形溫度維卡軟化點測定儀是依據新的標準而設計制造的非金屬材料試驗儀器，主要用于塑料、硬橡膠、尼龍、電絕緣材料、長纖維增強復合材料、高強度熱固性層壓材料等非金屬材料的熱變形溫度及維卡軟化點溫度的測定。操作方便、控制，是種智能化高的測試儀器，廣泛應用于大院校，科研單位及產品質量監督檢驗單位。PID調相輸出，具有上限溫度設定，試驗溫度達到上限溫度時自動停止加熱。
執行標準：符合JTGE50、GB/T 1633、GB/T 8802、GB/T 1634、ISO 2507、ISO 75、ISO 306、ASTM D 1525, ASTM D 648等標準要求。
Overview of tcjt-33 hot deformation temperature Vicat softening point tester:
Tcjt-33 thermal deformation temperature Vicat softening point tester is a non-metallic material test instrument designed and manufactured according to the new standard. It is mainly used to measure the thermal deformation temperature and Vicat softening point temperature of plastic, hard rubber, nylon, electrical insulating materials, long fiber reinforced composites, high strength thermosetting laminated materials and other non-metallic materials. Easy to operate, accurate control, is a highly intelligent test instrument, widely used in Colleges and universities, scientific research institutions and product quality supervision and inspection units. PID phase modulation output, with upper limit temperature setting, when the test temperature reaches the upper limit temperature, the heating will s automatically.
Executive Standards: meet the requirements of jtge50, GB / T 1633, GB / T 8802, GB / T 1634, ISO 2507, ISO 75, ISO 306, ASTM D 1525, ASTM D 648 and other standards.
技術參數
二、TCJT-33型熱變形溫度維卡軟化點測定儀技術參數：
二、TCJT-33型熱變形溫度維卡軟化點測定儀技術參數：
1、溫度控制范圍：室溫～300℃
2、升溫速率：120℃/h 、 50℃/h
3、大溫度誤差：±0.5℃
4、溫度測量點：1個
5、試樣架數：3
6、形變測量量具：數顯千分表
7、形變測量范圍：0～1.1mm
8、試樣支承跨距：64mm、100mm
9、大形變測量誤差：0.01mm
10、加熱介質：甲基硅油（客戶自備）
11、冷卻方法：150℃以上自然冷卻，150℃以下水冷或自然冷卻
12、所需空間：后0.5m，左右1.5m
13、電源：220V
14、外型尺寸：850×450×670mm
15、整機重量：67Kg
Technical parameters of tcjt-33 hot deformation temperature Vicat softening point tester:
1. Temperature control range: room temperature ~ 300 ℃
2. Heating rate: 120 ℃ / h, 50 ℃ / h
3. Maximum temperature error: ± 0.5℃
4. Temperature measuring point: 1
5. Number of test pieces: 3
6. Deformation measuring tool: digital dial indicator
7. Deformation measurement range: 0-1.1 mm
8. Support span of sample: 64mm, 100mm
9. Maximum deformation measurement error: 0.01mm
10. Heating medium: methyl silicone oil (customer provided)
11. Cooling method: natural cooling above 150 ℃, water cooling or natural cooling below 150 ℃
12. Required space: 0.5m in front and back, 1.5m in left and right
13. Power supply: 220 V
14. Dimensions: 850 × four hundred and fifty × 670mm
15. Weight: 67kg
產品選型
主營產品：土工檢測儀器,防水材料檢測儀器,陶瓷磚檢測儀器,水利水電粗粒土系列,瀝青儀器檢測儀器
主營產品：土工檢測儀器,防水材料檢測儀器,陶瓷磚檢測儀器,水利水電粗粒土系列,瀝青儀器檢測儀器
Main products: geotechnical testing instrument, waterproof material testing instrument, ceramic brick testing instrument, water conservancy and hydropower coarse-grained soil series, asphalt testing instrument
所有評論僅代表網友意見，與本站立場無關。