7006-28A-1 E27 screw cap gauge Stop gauge
7006-28A-1 Screw cap gauge check gauge Not Go Gauge E27 lamp holder gauge
E27 Lamp holder gauge name
Meet the standard: IEC 60061; GB1483.1
Product category:
E27 Lamp holder gauge Pass Gauge 7006-27B-1
E27 Screw cap gauge Stop 7006-28A-1
E27 Lamp holder Solder Height Gauge 7006-27C-1
E27 Screw cap Contact performance Gauge 7006-50-1
E27 Lamp holder Anti-accidental contact gauge (anti-electric shock) 7006-51A-2
?7006-28A-1 Screw cap gauge check gauge Not Go Gauge E27 lamp holder gauge
| Reference | Dimension/ dimension (mm) | Tolerance/ tolerance (mm) |
| d | 26.05 | +0.0/-0.01 |
| L | 16.5 | ±0.1 |
| U | 1 | +0.0/-0.1 |
| V | 17.0 | +0.05/-0 |
| W | 2 | ±0.1 |
| α | Nom. Nominal value 45° | |
| Weight/ mass | 0.15KG | ±10% |
7006-28A-1 Screw cap gauge check gauge Not Go Gauge E27 lamp holder gauge
Purpose:
To check the minimum outside (major) diameter of the screw thread.
7006-28A-1 Screw cap gauge check gauge Not Go Gauge E27 lamp holder gauge
Testing :
When the gauge is placed over the thread of the cap on a finished lamp, held cap uppermost, the center contact shall not project beyond surface “X”. Only the weight of the gauge itself shall be used in the test.
7006-28A-1 Screw cap gauge check gauge Not Go Gauge E27 lamp holder gauge
Purpose:
To check the minimum outside (major) diameter of the screw thread.
7006-28A-1 Screw cap gauge check gauge Not Go Gauge E27 lamp holder gauge
Purpose:
To check the minimum outside (major) diameter of the screw thread.
7006-28A-1 Screw cap gauge check gauge Not Go Gauge E27 lamp holder gauge
Testing :
When the gauge is placed over the thread of the cap on a finished lamp, held cap uppermost, the center contact shall not project beyond surface “X”. Only the weight of the gauge itself shall be used in the test.
7006-28A-1 Screw cap gauge check gauge Not Go Gauge E27 lamp holder gauge
Purpose:
To check the minimum outside (major) diameter of the screw thread.
??
所有評論僅代表網友意見，與本站立場無關。