IP40 test set D test probe
IEC61032 IP40 tester D 1.0MM diameter test probe can be equipped with 1N thrust device
I. Basic Introduction:
1. It is made according to GB/T4208-2008, IEC61032:1997, IEC60529:2001 and UL, etc.
2. Class D test probe (Class D test needle) is a necessary instrument for anti-shock protection test of household and similar electrical appliances.
IEC61032 IP40 tester D 1.0MM diameter test probe can be equipped with 1N thrust device
Ii. Technical parameters:
6. According to IEC61032 Figure 4(Test probe D), GB/T4208-2008 Table 6 (first characteristic digit 4/5/6).
IEC61032 IP40 tester D 1.0MM diameter test probe can be equipped with 1N thrust device
Iii. Usage:
As shown in the figure, the joint part of the standard test finger shall not touch live parts or approach dangerous parts, and the 35mm round baffle shall not enter.
In the test requirement of preventing access to dangerous parts, the D-type test probe shall have 1±0.1N thrust.
IEC61032 IP40 tester D 1.0MM diameter test probe can be equipped with 1N thrust device
Iii. Usage:
As shown in the figure, the joint part of the standard test finger shall not touch live parts or approach dangerous parts, and the 35mm round baffle shall not enter.
In the test requirement of preventing access to dangerous parts, the D-type test probe shall have 1±0.1N thrust.
所有評論僅代表網友意見，與本站立場無關。