久久久久成人热国产精品不卡,神马电影网,神马午夜影院,五月激情综合网站,婷婷成人综合,最近中文字幕在线中文高清版_欧美日韩在线三区_bl肉yin荡受np各种play_日本韩国欧美亚洲国产_福利在线国产精品

Elcometer 3230 濕膜輪
如果知道涂層的干、濕比率，便可通過濕膜厚度計算干膜厚度。
不同的測量量程從0~25μm（0~1mils）*0~3000μm（0~40mils）。

連續刻度，測量準確度為±5%。
適用于平面和曲面測量。
不銹鋼材質，耐磨損，用溶劑清洗后可重復使用。

Elcometer 3230 濕膜輪

型號	分類	量程	分度	零件號
Elcometer 3230/1	Elcometer 3230 濕膜輪	0~25μm	1.25μm	K0003230M001
Elcometer 3230/16	Elcometer 3230 濕膜輪	0~40μm	2.0μm	K0003230M016
Elcometer 3230/2	Elcometer 3230 濕膜輪	0~50μm	2.5μm	K0003230M002
Elcometer 3230/3	Elcometer 3230 濕膜輪	0~100μm	5.0μm	K0003230M003
Elcometer 3230/4	Elcometer 3230 濕膜輪	0~150μm	7.5μm	K0003230M004
Elcometer 3230/5	Elcometer 3230 濕膜輪	0~200μm	10.0μm	K0003230M005
Elcometer 3230/6	Elcometer 3230 濕膜輪	0~250μm	12.5μm	K0003230M006
Elcometer 3230/7	Elcometer 3230 濕膜輪	0~300μm	15.0μm	K0003230M007
Elcometer 3230/8	Elcometer 3230 濕膜輪	0~400μm	20.0μm	K0003230M008
Elcometer 3230/9	Elcometer 3230 濕膜輪	0~500μm	25.0μm	K0003230M009
Elcometer 3230/10	Elcometer 3230 濕膜輪	0~1000μm	50.0μm	K0003230M010
Elcometer 3230/15	Elcometer 3230 濕膜輪	0~1500μm	75.0μm	K0003230M015
Elcometer 3230/11	Elcometer 3230 濕膜輪	0~2000μm	100μm	K0003230M011
Elcometer 3230/12	Elcometer 3230 濕膜輪	0~3000μm	150μm	K0003230M012
Elcometer 3230/1a	Elcometer 3230 濕膜輪	0~1mils	0.05mils	K0US3230M001
Elcometer 3230/2a	Elcometer 3230 濕膜輪	0~2mils	0.1mils	K0US3230M002
Elcometer 3230/3a	Elcometer 3230 濕膜輪	0~4mils	0.2mils	K0US3230M003
Elcometer 3230/4a	Elcometer 3230 濕膜輪	0~6mils	0.25mils	K0US3230M004
Elcometer 3230/5a	Elcometer 3230 濕膜輪	0~12mils	0.5mils	K0US3230M005
Elcometer 3230/6a	Elcometer 3230 濕膜輪	0~20mils	1mils	K0US3230M006
Elcometer 3230/7a	Elcometer 3230 濕膜輪	0~40mils	2mils	K0US3230M007
附件	15cm（5″）濕膜輪手柄			KT003230N003
	50cm（19″）濕膜輪手柄			KT003230N002
	100cm（39″）濕膜輪手柄			KT003230N001

Elcometer 3230 濕膜輪

符合以下標準
ASTM D1212-91-A	BS 3900-C5-1B
ISO 2802-1B	NF T30-125

How to use a Wet Film Wheel - Elcometer 3230 Wet Film Wheel

ISO 2808-7B, BS 3900-C5 method 7B, ASTM D4414-A specify that the wet film wheel should be perpendicular to the substrate and the thickness of the coating should be stated as that indicated on the central wheel - ensuring that the wheel has been rolled from maximum thickness to minimum thickness - thus avoiding surface tension.

Example

Hold the wheel by its central spindle. Begin at maximum thickness to reduce risk of inaccuracy caused by surface tension.

Roll the wheel through the wet film with the side 1 in the diagram touching the substrate. Roll for at least one whole turn and slowly enough for wetting to occur. Roll the wheel backwards by at least on complete turn. The wet film thickness is read from the scale, at the end of the wetted segment of the middle circle, 2 in the diagram

To use wheel on pipes, measure across the longitudinal axis (lengthways) of the pipe.

On rough surfaces, measurements will be made from the surface peaks and represent the minimum wet film thickness